Main Fixture
Cross Bar
House Grounding Wire
Green Grounding Screw
Fixture Grounding Wire
Wire Nut
Outlet Box
Fixture Wire
Back Plate
Important to Know
1. Read all instructions carefully before installation
and operation.
2. If you are not familiar with state and local electrical
codes, it is recommended that you consult with a
qualified electrician.
3. Before installation, shut off power at the main fuse
or circuit breaker box. Be aware that simply turning
off the wall switch is not sufficient to prevent
an electrical shock.
4. This fixture requires a 120 VAC, 60 Hz power
source. Maximum wattage is 60W per socket.
5. Do not attempt to take the lantern apart; there are
no serviceable parts inside.
6. To avoid sensor damage by lighting or electrical
surge, make sure the grounding wire is
securely connected.
7. For general safety and to avoid any possible
damage to the sensor, be sure the power is
switched "off" before replacing the bulb.
Maximum Wattage: 1x60W
Mounting Screw
Headless Screw
Lock Nut
Bulb Type A Max.60W
(not included)
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Customer Service: 1-800-887-6326 (weekdays 9 a.m. – 5 p.m. CST)
3. READ AND SAVE THESE INSTRUCTIONS.
356-4027
130910
Features
1. The motion be detected only at night.
2. Light will turn off automatically after motion is
no longer detected.
3. PC' Mode provides illumination from dusk
to dawn.
4. When in manual override mode, use wall
switch to keep the light ON all night long.
1 SET
Hardware Package:
Ball Nut
Rubber Pad
