Parkside 393778 2104, Инструкции по эксплуатации и безопасности

Страница: 23 / 182

GB/IE/NI 23
Operation
Irrigation can be fully automated at any time of the day using the
irrigation controller. A sprinkler, sprinkler system or drip irrigation
system may be connected.
The irrigation controller automatically carries out irrigation at
the respective programmed start time and for the programmed
duration. Take the season and time of the day into consideration
when programming. Evaporation and water consumption is
lowest early in the morning or late in the evening.
Putting the product into operation
1. Insert batteries to the item as described in the chapter
“Inserting / replacing batteries”.
2. Connect the water timer to water tap (see Fig. D).
Setting current time and day of week
1. Press button
3
for approx. 2 seconds (not necessary if
you just insert batteries).
The
hour
display in the
“Time”
section will flash on
screen (see Fig. 1).
2. Set the time in
hours
with the rotary control
5
(For example
9 hour) and confirm with the button
3
(see Fig. 2).