PSSA 20-Li A1
GB
│
MT
│
49
■
Original accessories/auxiliary
equipment
■
Use only the accessories and additional
equipment that are specified in the oper-
ating instructions and are compatible with
the appliance.
Using attachments or accessory
tools other than those recommended in the
operating instructions can lead to a risk of injury .
Information on saw blades
You can use any saw blade provided it is fitted with
a suitable mount – ½" (12 .7 mm) universal shaft .
Saw blades optimised for your sabre saw are avail-
able from retail stores in different lengths for
various purposes .
NOTE
►
TPI = teeth per inch = the number of teeth
per 2 .54 cm
Wood saw blade
Dimensions: 152 .5 x 0 .9 mm, 6 - 12 TPI
Ideal for: sawing construction wood, chipboard,
panels and plywood, and also plunge cuts .
Before use
Charging the battery pack
(see fig . A)
CAUTION!
►
Always unplug the appliance before you
remove the battery pack from or connect the
battery pack to the charger .
NOTE
►
Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C .
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level is
between 50% and 80% . The storage climate
should be cool and dry and the ambient
temperature should be between 0°C and
50°C .
♦
Connect the battery pack to the high-speed
battery charger (see fig . A) .
♦
Insert the power plug into the socket .
The control LED lights up red .
♦
The green LED indicates that the charging
process is complete and the battery pack is
ready .
ATTENTION!
♦
If the red control LED flashes, this means
that the battery pack has overheated and
cannot be charged .
♦
If the red and green control LEDs both
flash, this means that the battery pack is
defective .
♦
Push the battery pack into the appliance .
♦
Switch off the charger for at least 15 minutes
between successive charging sessions .
Also disconnect the power plug from the mains
power socket .
Содержание 351750 2007
Страница 3: ...A...
