PSSA 20-Li A1
■
48
│
GB
│
MT
6 . Service
a)
Have your power tool serviced by a qualified
repair person using only identical replace
ment parts.
This will ensure that the safety of
the power tool is maintained .
b)
Never service damaged battery packs.
Service
of battery packs should only be performed by
the manufacturer or authorized service providers .
Appliance-specific safety instructions
for sabre saws
To avoid the risk of injury or fire as well as
health risks
■
Hold the power tool by the insulated grip-
ping surfaces when performing work
where the power tool may hit hidden
power lines or its own power cord.
Contact
with a live wire may electrify exposed metal parts
of the power tool and could give the operator an
electric shock .
■
Secure and secure the workpiece to a
stable surface by means of clamps or
otherwise.
Holding the workpiece by hand or
against your body will cause it to remain
unstable, resulting in loss of control .
■
Wear a dust mask!
Safety guidelines for battery
chargers
■
This appliance may be used by
children aged 8 years and above
and by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks . Do not allow
children to use the appliance as a
toy . Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised .
■
To avoid potential risks, damaged
mains cables should be replaced
by the manufacturer, their customer
service department or a similarly
qualified person .
The charger is suitable
for indoor use only .
WARNING!
■
If the power cord requires replacement, this
should be carried out by the manufacturer or
an approved representative to avoid safety
hazards .
ATTENTION!
♦
This charger can only charge the following
batteries: PAP 20 A1/PAP 20 A2/
PAP 20 A3/PAP 20 B1/PAP 20 B3 .
♦
A current list of battery compatibility can be
found at www .lidl .de/Akku .
Содержание 351750 2007
Страница 3: ...A...