PTS 710 A1
■
18
│
GB
│
IE
PLUNGE SAW PTS 710 A1
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please famil-
iarise yourself with all operating and safety instruc-
tions. Use the product only as described and for the
range of applications specified. Please also pass
these operating instructions on to any future owner.
Intended use
The appliance is primarily designed for sawing
longitudinal and cross cuts in a plunge cut into
firmly supported solid wood, chip board, plywood,
aluminium, tiles, stone, plastics, and lightweight
construction materials. Any other uses of or modifi-
cations to the appliance are deemed to be improp-
er usage and may result in serious physical injury.
Not for commercial use.
Equipment
Front handle
Safety lock-out
ON/OFF switch
Rear handle
Power on/control lamp
Power cord
Base plate
Scale for cutting depth
Cutting depth preselector
Rip fence
Rip fence slot
Screw for rip fence
Viewing window for cutting line
Figure A:
Battery compartment cover
Dust extractor connection
Spindle lock
Figure B:
Clamping flange
Tensioning screw
Saw blade
Hex key
Figure C:
Laser ON/OFF switch
Laser aperture
Figure D:
Diamond-coated cutting saw blade
HSS circular saw blade Z85/60
HSS circular saw blade Z85/80
TCT saw blade Z85/30
Suction hose
Package contents
1 plunge saw
1 TCT saw blade Z85/30
1 diamond-coated cutting saw blade
1 HSS circular saw blade Z85/60
1 HSS circular saw blade Z85/80
1 rip fence
1 suction hose
1 hex key
1 carrying case
1 battery
1 set of operating instructions
Technical data
Nominal output:
710 W
Nominal voltage:
230 V ~, 50 Hz
(AC)
Idle speed:
n
0
5300 rpm
Max. cutting depth:
25 mm
max.25
mm
Thread size:
M6
Protection class:
II / (double insulation)
Noise and vibration data:
Noise measurement value determined in accord-
ance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level: L
PA
=
90
dB(A)
Uncertainty: K
PA
=
3
dB
Sound power level:
L
WA
=
101
dB(A)
Uncertainty: K
WA
=
3
dB
Wear ear muffs!
Содержание 310843
Страница 85: ...PTS 710 A1 82 PL...