Parker Sporlan S3C, Инструкция по установке и эксплуатации

Страница: 85 / 146

Bulletin 100-50-9.1 – Page 85
8. Press the
SET
button when e (Number of
Evaporators) is displayed. Use the ▲ button and scroll
to
1
(1 Evaporator); press
SET.
9. Press the
SET
button when

(Building Automation
System Expected) is displayed. Use the
▲▼
buttons to
choose
e
or
o
; press
SET.
a. If
e is chosen, the display will show  (Building
Automation System Protocol). Press the
SET
button
then use
▲▼
buttons to choose the B.A.S. Protocol
based on the below chart; press
SET.
10. Press the
SET
button when
o
(Month) is shown. Use
the
▲
button to choose the current month; press
SET.
11. Press the
SET
button when
d
(Day) is shown. Use the
▲
button to choose the current day; press
SET.
12. Press the
SET
button when e (Year) is shown. Use
the ▲ button to choose the current day; press
SET.
13. Press the
SET
button when e (Time) is shown.
Use the
▲
button to choose the current time in 24
hour format; press
SET. Note: Holding the
▲
or
▼
down while setting the time will accelerate the
scrolling.
14. Press the
SET
button when
ef
(Refrigerant Type) is
shown. Use the
▲▼
buttons to choose the Refrigerant
Type; press
SET.
The list of refrigerants can be seen in
Table on page 99.
15. Press the
SET
button when  (Number of Cases
Expected in Line-up) is shown. Use the ▲▼ buttons to
choose the number of cases expected in the Line-up;
press
SET.
16. Press the
SET
button when

(Evaporator Pressure
Regulating Valve Type) is shown. Use the
▼
button to
scroll to
oe
(no EEPR); press
SET.
17. Press the
SET
button when  (Return Air
Temperature Setpoint) is shown. Use the ▲▼ buttons to
choose the setpoint in °F; press
SET.
18. Press the
SET
button when def (Defrost Type) is
shown. Use the ▲▼ buttons to choose the Defrost Type;
press
SET.
Defrost options are:
19. Press the
SET
button when d (Defrost Termination
Temperature Setpoint) is shown. Use the ▲▼ buttons to
choose the setpoint in °F; press
SET.
20. Press the
SET
button when de (Defrost Termination
Fail-safe Time) is shown. Use the ▲▼ buttons to choose
the fail-safe time in minutes; press
SET.
21. Press the
SET
button when dfd (Number of Defrosts
Per Day) is shown. Use the ▲▼ buttons to choose the
defrost per day; press
SET.
The S3C Case Control system is now set-up and will begin
controlling the walk-in cooler/freezer.
Display Meaning
hg Hot gas
ee Electric

Air
Display Meaning
485 Modbus Protocol over RS-485
6485 Bacnet Protocol over RS-485

Bacnet Protocol over IP (Ethernet)
o Modbus Protocol over IP (Ethernet)