Parker Smog-Hog PCN, Руководство пользователя

Страница: 15 / 22

11
SMOG-HOG Electrostatic Precipitator PCN Series
Figure 5
Power Pack Terminal Connections
5.5 Checking Air Movement (Blower and Drive)
1. If the unit has deficient airflow:
a. Check for any type of restriction in the pick-up hood, flex hose or main unit.
b. Remove the pre-filter, cell and ionizer components and check for an obstruction at the diffuser plate
directly above them. If none is present, check the components for excessive dirt build up.
c. If components are clean, remove the side access panel and check for:
i. Loose or broken belt
ii. Defective drive motor
iii. Loose pulley
The belt should have approximately 1⁄2” of play when depressed with one finger. Having the belt set
too loose causes slippage and reduces airflow. Having the belt set too tight causes an over current
condition in the motor. The resulting higher temperature shortens motor winding and bearing life.
!
C A U T I O N
6. Replacement Parts
6.1 Ordering Parts
Replacement parts can be ordered from your local representative or from Parker direct.
To order parts from Parker, contact Customer Service at 1-800-348-4048. Please have the following
information available for prompt service:
1. Unit model number (on nameplate, blower access door)
2. Unit serial number (on nameplate, blower access door)
3. Part number of part(s) (see parts list)
6.2 Returning Parts
When returning a defective part under warranty, you need to call Parker Hannifin for a Return Material
Authorization (RMA) number. This control number assures you receive prompt service, so it should
appear prominently on the package being returned.