Parker PHD28 Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 157

Parker PHD28 Скачать руководство пользователя страница 83

5

Description

2 Application Programming Interface (API)

PHD API Reference

2

Application Programming Interface (API)

Description

This section describes the events available to Storyboard Designer for sending data to and
receiving data from the rest of the system.
The API definitions are divided into functional blocks, although there are a number of
DCP management events that are available across all I/O channels. Those are described
first, in the next section.
All DCP-related content is sent from the Storyboard application via events.
For many events, multiple keys are supported. When sending a multiple key event, not all
keys need to be specified, only those of interest.
For example, if sending an

nxs.set_dout

message to set DOUTs GPIO2 and P5V0, only

those two keys, along with their values, would need to be sent. Any keys not specified
would retain their current state.

«
...
81
82
83
84
85
...
»

Содержание PHD28






























































































































































Отзывы:

Нет отзывов