Parker PHD28 Скачать руководство пользователя страница 81 | Manualshive

Страница: 81 / 157

Parker PHD28 Скачать руководство пользователя страница 81

3

Product documentation

1 Introduction

PHD API Reference

Product documentation

The following publications are relevant for users of this product.
• PHD Catalog datasheets HY33-5021/US thru HY33-5023/US
• PHD User Guide/Instruction book HY33-5021-IB/US
• PHD Network Interface Configuration manual HY33-5021-M1/US
All documentation may be found on our web pages, located at www.parker.com/ecd.
Contact the manufacturer if there is anything you are not sure about or if you have any
questions regarding the product and its handling or maintenance.
The term "manufacturer" refers to Parker-Hannifin Corporation.

Licensing

The software running on the PHD devices makes use of code built around the GNU
General Public License, version 2.
All Parker-modified GPL code continues to be licensed under the GNU General Public
License. This license is available in its entirety at the end of this document.
All user-facing application programs must make mention of the underlying use of GNU
code accessible through a menu somewhere in the program and the accompanying full text
of the GNU General Public License version 2.0 should be available through a further
screen. This does not mean that the application program must be released under the GPL.
Rather, it must make mention that GPL code is in use on the device.
All Parker-generated code is copyright Parker-Hannifin Corporation, all rights reserved.
No part of this Parker code may be reproduced, published, or distributed in any form or by

Key

An identifier paired with a value, attached to an event. A key-value pair is
represented in this document as (key, value). Those parentheses serve to
delimit the text and are not used during programming.

NCC

Non-volatile customer configuration (or ncc) is the component that handles
access to the non-volatile memory available on the system. It uses
Storyboard I/O channel "ncc".

Nexus

Nexus (or nxs) is the system hardware interface component that bundles
together much of the low-level functionality (ADC, backlight, RTC) for
presentation to Crank via DCP. It uses Storyboard I/O channel "nxs".

Storyboard application

an application developed using the Crank Storyboard Designer that can run
on a target using the Crank Storyboard Engine. The Storyboard application
communicates with lower-level functionality via DCP using the events
described in this API.

UI

User Interface. This is the graphical component of a Storyboard application
used to interact with the device.

Value

Data associated with a key. Supported types are signed and unsigned
integers (8, 16, 32 or 64 bits), floats (32-bit only), arrays of integers or
floats, and null-terminated strings. A key-value pair is represented in this
document as (key, value). Those parentheses serve to delimit the text and
are not used during programming.

«
...
79
80
81
82
83
...
»

Содержание PHD28






























































































































































Отзывы:

Нет отзывов