Parker Parflange 1025, Руководство по эксплуатации

Страница: 83 / 118

76
13.1 O-Lok
®
assembly instructions
Flange Seal
Mechanical flaring and assembly
•
Safe method
•
Efficient procedure
•
Use the Parflange ® process
Parflange
®
1025
Parflange ® machine:
• Select flaring pin in
accordance with tube
dimensions
•
Use standard O-Lok®
flaring pin
• The flaring pin must not
feature any wear and tear,
damage or contaminants
• Keep the flaring pin clean
and lubricate it regularly
•
Select the clamping jaws in
accordance with the tube
dimensions
• Use the special clamping
jaws for the flange seal
•
The clamping surfaces must
not feature any wear and tear
or abrasion
• Only use original Parker
tools for O-Lok®
Observe limits for max. tube
wall thickness
•
Insert flaring pin in tool holder
• Ensure that the automatic
lubricating unit is filled with
EONIROMONTFLUESSX or
LUBSS
• Slide the nut over the
tube end and place the
support sleeve in the
clamping jaw half
• Fit the clamping jaw
halves together
•
Insert the closed jaw
set into the conical
Insert the tube end until the
stop point
•
Clamp the tube
• Secure the tube
•
Activate
Do not reach into the
operating area
•
Open the clamping lever
• Remove tube end from the
machine with clamping jaws
• Loosen the jaws in the
separator by moving the tube
sideways