Digi Cell Plus - Digital Oil Test Cell Information Guide
6
GB
Test by-product (H
2
)
Hydrogen gas (H
2
)
build-up risk
Use in well ventilated areas.
No open flames, smoking or sources of ignition.
Never add water instead of oil samples.
Dispose of waste carefully.
The water in oil test reagents react rapidly with water. In normal operation up to 70 ml H
2
is generated.
Test waste can continue to react with water and moisture from the atmosphere. Test waste must not be poured into a
closed container or lidded slops bucket where H
2
can accumulate. Adequate ventilation must be ensured to avoid H
2
build-up in a confined space. H
2
gas is explosive at concentration levels above 4%.
Conformity
This equipment is CE marked (approved for the EEA market) and UKCA marked (UK Conformity Assessed).
See
Contact, consumables and spares information sheet
for conformity documentation.
Exclusion of Liability
Every endeavour has been made to ensure the accuracy of the content of this information guide however errors cannot be
ruled out. Consequently, no liability is accepted for such errors as may exist or for any damage or loss whatsoever which
may arise as a result of such errors. All details are subject to technical modifications. Technical specifications are subject to
change without notice.