INSTALLATION & MAINTENACE MANUAL
RCOe2100/03.06
24
Packing removal
procedure
Operators assigned to handle and remove the packing must adopt individual protection
devices (gloves, helmet, and safety shoes) and respect the general safety regulations
required by EEC directives and legislations valid in the user’s country.
About individual protection devices the European Community has issued the directives
89/686/CEE and 89/656/CEE.
Once the packing has been completely removed, if the motor has been partially of fully
subject to a corrosion-proof treatment, it is necessary to clean the treated parts
thoroughly so that to eliminate the anti-oxidant: this operation has to be performed by
using cloths dampened into solvent.
Materials used as packing material like boards, wooden walls, and waterproof covers cab
be stored and successively re-used as loose material.
In no case may they be disposed in the environment; in particular do not burn water-
proof covers. They must be disposed in an authorized site for differentiated waste
disposal.
Parker Calzoni s.r.l. does not hold any responsibility for the improper use of packing
material as well as for successive handling of the motor.
3.5 – Contents Control
Check carefully that the received material complies with the shipping documents and has not been damaged
during the transportation. Notify immediately any discrepancies or damages. For any kind of assistance
request or communication concerning a motor, the user must inform about the unit complete model code
(information reported on the motor metal plate) and serial number.
