INSTALLATION, OPERATION, AND MAINTENANCE MANUAL ALIGN™ MULTI-GAS GENERATOR
6
Parker Hannifin cannot anticipate every possible circumstance which may represent a potential hazard.
The warnings in this manual cover the most known potential hazards, but cannot be all-inclusive. If the
user employs an operating procedure, item of equipment or a method of working which is not specifically
recommended by Parker Hannifin the user must ensure that the equipment will not be damaged or become
hazardous to persons or property.
Most accidents that occur during the operation and maintenance of machinery are the result of failure to
observe basic safety rules and procedures. Accidents can be avoided by recognizing that any machinery is
potentially hazardous.
Note: Any interference with the calibration warning labels will invalidate the gas generator’s warranty and
may incur costs for the recalibration of the gas generator.
Should you require an extended warranty, tailored service contracts or training on this equipment, or any
other equipment within the Parker Hannifin range, please contact your local Parker Hannifin office. Details
of your nearest Parker Hannifin sales office can be found at www.parker.com/labgas.
Retain this user guide for future reference.
2.1 Marks and Symbols
The following markings and international symbols are used on the equipment and within this manual:
Marking
Description
Electrical Ground
Warning: Do not remove covers while generator
is operational.
Warning: Fans are inside, consult the manual.
Warning: Do not perform maintenance while the
generator is pressurized.
Warning: Exposed electrical connections inside.
Caution
Caution: Electrical Hazard
Warning: Exposed, rotating pulley
When disposing products for end of life including
electronic parts and assemblies, follow local waste
disposal regulations
IOM_PKR_Align Multi-Gas Generator_022021.indd 6
IOM_PKR_Align Multi-Gas Generator_022021.indd 6
2/17/2021 1:11:41 PM
2/17/2021 1:11:41 PM
