INSTALLATION, OPERATION, AND MAINTENANCE MANUAL ALIGN™ MULTI-GAS GENERATOR
10
4.2. Inspect the Equipment
DO NOT ATTEMPT TO POWER UP THE GENERATOR UNTIL COMPLETING ALL STEPS BELOW.
Inspect the generator and check for signs of damage. Verify that the following items are included with
the shipment:
If the generator is damaged or any items are missing, inform the delivery company immediately and contact
Parker Hannifin.
Qty
Description
1
Drain Silencer Assembly
1
Condensate Bottle
3
¼’’ NPT to ¼’ Tubing Elbow
1
Power Cord
3
50’ Tubing
1
Tube Cutter
2
Spare Fuses
4.3. Removing the Internal Shipping Brackets
Figure 6
Figure 3
Remove
Foam
Unlock Casters
Ramp Pin
Inserts
The generator is shipped with internal brackets to prevent damage during transit. To access these brack-
ets, remove the front and rear panels of the generator using a medium Philips screwdriver. The rear panel
screws are covered by caps that can be removed using a small flathead screwdriver. Next, locate and
remove the yellow brackets from the generator by removing the four securing bolts with a 9/16’’
socket wrench. (See Figures 7-10)
Please retain these brackets, as they must be re-installed if the generator is transported at any
time in the future.
Figure 4
Figure 5
IOM_PKR_Align Multi-Gas Generator_022021.indd 10
IOM_PKR_Align Multi-Gas Generator_022021.indd 10
2/17/2021 1:11:56 PM
2/17/2021 1:11:56 PM
