Parker AC890PX Series, Быстрый старт

Страница: 5 / 26

Page 5
Introduction
The AC890PX is designed to control 3-phase induction or permanent magnet AC motors, or to be used
as an active front-end.
•
Remote control using configurable analogue and digital inputs and outputs.
•
Local control using the Keypad.
•
Use the Drive System Explorer Configuration Tool (DSE 890) to give access to parameters,
diagnostic messages, trip settings and application programming.
•
Fit Options to the unit to give serial communications and closed loop speed control.
IMPORTANT:
Motors used must be suitable for Inverter duty.
About this QuickStart
This QuickStart will:
•
Familiarise you with the terminals and operation of the unit.
•
Provide
basic
*
installation details and a quick set-up procedure.
•
Show you how to Autotune the drive and start the motor.
*
Because the 890 is a system product and we have no knowledge of your application, we detail the
quickest way to power-up the drive using a simple earthing scheme with minimal control wiring. Refer
to the full Engineering Reference Manual for items not covered in this QuickStart.
Provided with every 890 unit is a :
z
Quickstart
z
Compact disk containing the Engineering Reference Manual and DSE Lite Configuration Tool
z
Keypad
z
Customer-ordered Options
This QuickStart assumes that:
•
You are a qualified technician with experience of installing this type of equipment.
•
You are familiar with the relevant standards and Local Electric Codes (which take precedence).
•
You have read and understood the Safety information provided at the front of this QuickStart.
•
You realise that this guide contains only basic information and that you may need to refer to the
Engineering Reference Manual to complete your installation.