Parker AC890PX Series, Быстрый старт

Страница: 21 / 26

Page 21
The Menu Structure
The main menus are shown below. Each menu contains parameters.
NOTE
Refer to the AC890PX Engineering Reference Manual for a list of available parameters.
To change Operating Mode:
From power-up, the keypad displays the Software Version, and then times-out to show the Remote
Setpoint.
Mode Action
Toggle between modes using the L/R key
Remote to Local
SEQ and REF LEDs are On when in Local
Toggle between modes using the L/R key
Local to Remote
SEQ and REF LEDs are Off when in Remote
M
OPERATOR
menu at level 1
DIAGNOSTICS
menu at level 1
QUICK SETUP
menu at level 1
SETUP
menu at level 1
SYSTEM
menu at level 1
AC MOTOR DRIVE
15kW 400V 1.x
DOWN arrow to get to the SETUP menu -
contains all the parameters
DOWN arrow to get to the SYSTEM menu
DOWN arrow to get to the DIAGNOSTICS menu
DOWN arrow to get to the QUICK SETUP menu
This is the power-up welcome screen. If a different screen
appears, press E a few times to return to this screen.
Press the M key to get to the OPERATOR menu