Parker AC20F Series, Руководство по установке оборудования

Страница: 35 / 148

MSG11-5715-743/EN: AC20F Series - Hardware Installation Manual
MSG11-5715-743/EN 24.04.2023 35 (148)
Frames 2 - 5:
To access the links, it is necessary to open the product:
1. Remove the 4x Power Stack cover fixings (2x top, 2x bottom of product).
2. Carefully lift the power stack cover with the control module attached - just enough to adjust the link
positions. Removing the link completely is the same as placing the links in the ‘disconnected’ (pin 2
– 4) position.
Note: All power cables must be removed from the product to access the links.
Frame 6:
To access the Y-Cap links:
1. Remove the Lower Terminal cover.
2. Remove the 2x screws from the product.
To access the VDR link, it is necessary to open the product:
1. Remove the Lower Terminal cover.
2. Carefully remove the Upper Terminal cover, disconnecting the onboard keypad cable from the top
of the control board.
3. Remove the 4x plastic moulding fixings screws from the four corners of the product.
4. Carefully lift the power stack cover with the control board attached - just enough to adjust the link
position.
Note: All power cables must be removed from the product to access this link.
J2 DC Link
Y-Cap Link
J1
‘EMC’ AC
Line Y-Cap &
Y1
’VAR’
VDR Links
AC Line Y-Cap
Screws (x2)
Y1
’VAR’
VDR Link