Parker 404XE Series, Руководство по эксплуатации продукта

Страница: 20 / 35

404XE Series Product Manual
20
Parker Hannifin Corporation
EMN Automation - Parker
Irwin, Pennsylvania
The limit/home switch installed on the 404XE is a proximity sensor tripped by
a flag attached to the carriage. On the switch body is an LED to indicate acti-
vation. Normally open (N.O.), normally closed (N.C.), current sinking (NPN)
and current sourcing (PNP) variations are selectable with the product. Nor-
mally open sensors are typically used for home and normally closed are typi-
cally used for limits. With a current sinking sensor, the output lead provides a
path to ground when activated, and with a current sourcing sensor, the output
lead provides a positive (+) voltage potential relative to ground. Refer to you
controller ’ s manual for compatibility. Limit/home switch information is below.
See Appendix A for switch part numbers
.
Limit/Home Switch Information - 404XE
Do Not Reverse Supply Potential
Reversing supply potential of the 404XE limit/home sensor will destroy the sensor.
404XE Limit/Home Switch Wiring Code
Power (+) Brown
N.O. Output Signal Black
N.C. Output Signal White
Ground ( - ) Blue
404XE Sensor Pack Wiring Code
Power (+) Red
Limit 1
(1)
Output Signal Blue
Limit 2
(1)
Output Signal Orange
Home Output Signal Green
Ground ( - ) Black
Shield (Connect to Earth
Ground)
Green w/ Yellow Stripe
(1)
Limit 1 is the switch farthest from the connector on the sensor pack hous-
ing; Limit 2 is the switch closest to the connector.
404XE Limit/Home Switch Specifications
H2 or
L2
Option
H3 or
L3
Option
H4 or
L4
Option
H5 or
L5
Option
H6 or
L6
Option
H7 or
L7
Option
H8 or
L8
Option
H9 or
L9
Option
H11 or
L11
Option
H12 or
L12
Option
H13 or
L13
Option
H14 or
L14
Option
Switch Type N.C. N.O. N.C. N.O. N.C. N.O. N.C. N.O. N.C. N.O. N.C. N.O.
Logic NPN NPN PNP PNP NPN NPN PNP PNP NPN NPN PNP PNP
Input Power 5 - 30 VDC, 20 mA
Output 100 mA Max
Repeatability +/ - 10 µm Unidirectional
Reverse Polarity Protection No
Operating Temperature Range - 26°C to +70°C
Vacuum Rating 1 x 10
- 3
Torr
Cable Length 2.0 m from Switch 3.0 m from End of Sensor Pack 5.0 m from Switch
(1)
(1)
Includes locking connector at distance 150 mm from switch.
Chapter 3 - Component Specifications
Motor Information
The M41, M42, and M46 motor options supply a Parker servo or stepper motor assembled to the positioner.
For specifications and setup and connection parameters, refer to the motor user guides available for down-
load from www.parkermotion.com.