Parker 404XE Series, Руководство по эксплуатации продукта

Страница: 13 / 35

404XE Series Product Manual
13
Parker Hannifin Corporation
EMN Automation - Parker
Irwin, Pennsylvania
404XE Common Performance Characteristics
5mm Lead (D2 Option) 10mm Lead (D3 Option) 20mm Lead (D4 Option)
Bidirectional Repeatability - µm
T01 to T11 Option +/ - 10
T12 to T15 Option +/ - 15
Duty Cycle 100%
Max Acceleration
(1)
- m/s
2
(in/s
2
) 20 (787)
Normal Load Capacity
(2)
- kgf (lbs)
Short Carriage (NL Option) 61.3 (135)
Long Carriage (VL Option) 122.6 (270)
Axial Load Capacity
(1)(2)
- kgf (lbs) 60 (132) 70 (154) 70 (154)
Drive Screw Efficiency 90%
Max Breakaway Torque - Nm (oz - in) 0.25 (35)
Max Running Torque (Rated @ 2rps) - Nm (oz - in) 0.21 (30)
Linear Bearing Coefficient of Friction 0.01
Ballscrew Diameter - mm (in) 16.0 (0.63)
Carriage Weight - kgf (lbs)
Short Carriage (NL Option) 0.215 (0.47)
Long Carriage (VL Option) 0.495 (1.09)
(1)
Applies to units with long carriage (VL Option).
(2)
Refer to life/load charts.
Performance Specifications - 404XE
404XE Travel Dependent Performance Characteristics
Travel
Option
Travel
Positional
(3)(4)
Accuracy - µm
Input Inertia - 10
- 5
kg - m
2
Max Screw
Speed - rps
Max Velocity - m/s
Total Table
Weight - kgf
NL
Option
VL
Option
NL Option VL Option
NL
Option
VL
Option
5mm
Lead
10mm
Lead
20mm
Lead
5mm
Lead
10mm
Lead
20mm
Lead
5mm
Lead
10mm
Lead
20mm
Lead
T01 25 mm N/A 42 0.81 N/A N/A N/A N/A N/A 72 0.36 0.73 1.50 1.42 1.70
T02 50 mm N/A 50 0.94 0.98 N/A N/A N/A N/A 72 0.36 0.73 1.50 1.61 1.89
T03 100 mm 33 mm 58 1.19 1.23 1.12 1.21 1.30 1.40 72 0.36 0.73 1.50 1.95 2.23
T04 150 mm 83 mm 66 1.44 1.48 1.32 1.46 1.55 1.60 72 0.36 0.73 1.50 2.35 2.63
T05 200 mm 133 mm 74 1.69 1.73 1.51 1.71 1.80 1.79 72 0.36 0.73 1.50 2.59 2.87
T06 250 mm 183 mm 82 1.94 1.99 1.70 1.96 2.06 1.99 72 0.36 0.73 1.50 2.97 3.25
T07 300 mm 233 mm 90 2.20 2.24 1.90 2.21 2.31 2.18 72 0.36 0.73 1.50 3.34 3.62
T08 350 mm 283 mm 98 2.45 2.49 2.09 2.47 2.56 2.37 72 0.36 0.73 1.50 3.50 3.78
T09 400 mm 333 mm 106 2.70 2.74 2.29 2.72 2.81 2.57 72 0.36 0.73 1.50 3.83 4.11
T10 450 mm 383 mm 114 2.95 2.99 2.48 2.97 3.07 2.76 72 0.36 0.73 1.50 4.09 4.37
T11 500 mm 433 mm 122 3.21 3.25 2.67 3.22 3.32 2.96 72 0.36 0.73 1.50 4.22 4.50
T12 550 mm 483 mm 130 3.46 3.50 2.87 3.48 3.57 3.15 72 0.36 0.73 1.50 4.55 4.83
T13 600 mm 533 mm 138 3.71 3.75 3.06 3.73 3.82 3.34 69 0.34 0.68 1.32 4.87 5.15
T15 700 mm 633 mm 154 4.21 4.25 3.45 4.23 4.33 3.73 52 0.26 0.52 1.00 5.12 5.40
(3)
Positional accuracy applies to inline motor configurations only. Contact factory for parallel motor specifications. Positional specifications are based on un-
loaded conditions and apply to individual axes only.
(4)
Consult factory for specifications with linear feedback.