MULTI FUNCTION CAMERAS - ONE BUTTON CONTROL
One button control cameras have a small control box in the loom that allows you to make changes to the
camera such as Guidelines on/off, Guideline Style, Guideline Height, Guideline Width, PAL/NTSC,
Normal/Mirror Image, Inverted/Non Inverted Image.
Ideally place the one button controller in a position where both installer and customer can access.
Protect controller from water.
Mode select.
Click within 3 seconds to change setting. i.e.. 6 Clicks to select Grid Line Height and then leave a very
short pause and then press to adjust height. Height will move to maximum and then reset to lowest
before moving back up again in a loop.
Programming.
- 1 CLICK - Guide Line switching mode: Turn ON/OFF Guide Lines
THE FOLLOWING MODES MUST BE OPERATED WITH GUIDE LINES ON.
If guidelines are off you can not access the features to modify them. If the customer does not want
guidelines turn off after making any changes. Changes will be saved.
- 2 CLICKS (Quick-continuous clicks) - Mirror / Non Mirror and Invert Switching Mode
- 3 CLICKS (Quick-continuous clicks) - PAL / NTSC Switching Mode
- 4 CLICKS (Quick-continuous clicks) - Guide Line Type selecting Mode. 2 options of guide lines.
- 5 CLICKS (Quick-continuous clicks) - Guide Line Width adjusting Mode
- 6 CLICKS (Quick-continuous clicks) - Guide Line Height adjusting Mode
Page 6
