RECOMMENDED WIRING EXAMPLES ON NON CANBUS VEHICLES
TYPICAL WIRING FOR MONITOR AND CAMERA
SYSTEM ON REVERSE
The wiring will allow for the monitor and camera to
activate when the vehicles reverse gear is selected, at all
other times the monitor and camera will be off.
Relay is used to prevent power draw from battery when
system is off and isolate the circuit from the vehicle.
TYPICAL WIRING FOR ALWAYS ON MONITOR AND
CAMERA SYSTEM
When the vehicles ignition is on, the camera and monitor is
always on. A relay is used to prevent power draw from battery
when the system is off and isolate the circuit from the vehicle.
If more than one camera is used then use the trigger wire to
control the camera view.
Page 2
