RECOMMENDED WIRING EXAMPLES ON CANBUS VEHICLES
CANBUS VEHICLE - TYPICAL WIRING FOR MONITOR AND CAMERA FOR
POWER ON WHEN IN REVERSE (PSPK4)
Use PSPK4 for 12v on reverse to prevent any CANBUS errors on vehicle or
low power dropout from CANBUS ECU.
Relay is used as PSPK4 is rated at 1 Amp max.
CANBUS VEHICLE - TYPICAL WIRING FOR MONITOR AND CAMERA FOR
ALWAYS ON POWER (PSPK5)
Use PSPK5 for 12v on ignition to prevent any CANBUS errors on vehicle or
low power dropout from CANBUS ECU.
If more than one camera is used then use the trigger wire to control the
camera view.
Relay is used as PSPK4 is rated at 1 Amp max.
Page 3
