CANBUS VEHICLES AND CANBUS INTERFACE UNITS
It is highly recommended that you use a CANBUS Interface unit to make any connections to the vehicle
when fitting monitors and camera systems to prevent any issues with power, interference and warranty
claims.
PSKP4 / PSKP5 are 12 volt only. Do not connect to 24 volt systems. The PSKP4 and PSPK5 are 1 Amp rated
so use a relay for devices rated above 1 Amp (See wiring examples on page 3).
IMAGE OF PSPK4
PSPK4 - Provides 12v on reverse
Ideal for having the system activate when the vehicle is placed into reverse gear. At all other times the
system will be inactive or to use as a way of getting a reverse signal for a monitor trigger. For CAN High
and CAN Low location and connection refer to vehicle specifications or Parksafe Automotive.
Wiring
- RED - 12 volt DC Live via 5 amp fuse, AA or permanent Live
- BLACK - Ground/Chassis
- WHITE - CAN High
- BLUE - CAN Low
- PURPLE - 1 Amp Rated Max. Connect to monitor and camera power feeds via relay. Can also be used to
provide a reverse trigger output from the vehicle to activate the trigger on the monitor ideal if you have
power feed issues or cannot find a reverse feed on the vehicle.
IMAGE OF PSPK5
PSPK5 - Provides 12v on ignition
Ideal for having the system activate when the vehicle is running for an always on view of the camera or
cameras. For CAN High and CAN Low location and connection refer to vehicle specifications or Parksafe
Automotive.
Wiring
- RED - 12 volt DC Live via 5 amp fuse, AA or permanent Live
- BLACK - Ground/Chassis
- WHITE - CAN High
- BLUE - CAN Low
- PURPLE - 1 Amp Rated Max. Connect to power feeds of monitor and cameras via relay.
CANRUI
CANBUS Engineers programming kit
Essential for for onsite diagnostics and reprogramming of PSPK1 on vehicles that need special
programming. Everything you need to get your customers car talking to our parking sensor interface
without having to revisit site.
Page 4
