15
The injector manifold must be installed in the pool’s main return line after the pool
filter, heater, chlorinator and spa return. (Fig. 29A) shows the basic installation.
Locate the appropriate section of the return line and install the injector manifold
using PVC primer and glue on all mating surfaces. Glue in a minimum 2” return line.
Water flow arrows on the manifold must be followed and the injector needs to be
facing up with the bypass down. See Fig. 29A & 29B.
The Clear03 ozone suction line will hook directly up to the bottom of the Clear03
and the other end to the injector with the check valve provided with the Clear03. No
flow meter is needed or provided.
NOTE: THE CLEARO3 UNIT MUST BE MOUNTED AT LEAST 1' ABOVE
POOL WATER LEVEL TO PREVENT WATER FROM CONTACTING
ELECTRICAL EQUIPMENT.
PUMP
FILTER
HEATER
VENTURI INJECTOR
CLEAR03
CHECK VALVE
RETURN WATER
SUCTION FROM
POOL OR SPA
PLUMBING FOR THE CLEAR03
USING THE VENTURI INJECTOR METHOD
Fig. 29A
Fig. 29B
