Paramount Fitness clear o3, Руководство по установке, Страница: 17 / 24

17
test per instructions that air is vented from the filter when the pump is running. You
must install an external air bleed if the filter is old, does not have an internal air bleed,
there is a solar system on the pool or there is a robotic pressure side cleaner.
MOUNTING INSTRUCTIONS
1. Turn the power off to the pump.
2. Remove the pressure gauge from
the filter.
3. Install the nipple into one end of
the brass tee.
4. Install the pressure gauge by
threading into the other end of the
brass tee supplied.
5. Install the tubing compression
fitting by threading into the side of
the brass tee.
6. Install the tee assembly by
threading into the hole where you removed the pressure gauge (Fig. 32).
7. Insert one end of the tubing into the compression fitting (Fig. 32).
8. Turn the power on to the pump and check that air is coming from the other end of
the tubing.
9. Turn the power off to the pump.
10. Pick a spot on the return pipe downstream of all other devices (heater,
chlorinator, pressure cleaner, etc.)
11. Drill a 7/16” hole through the return pipe at the location selected.
12. Install the saddle clamp with the fitting over the hole. Make sure the gasket is in
place between the fitting and the pipe. (Fig. 32)
13. Lay the tubing along the return pipe to the saddle clamp fitting and cut off
excess length.
14. Connect the end of the tubing to the compression fitting on the saddle clamp
(Fig. 32). The tubing can be secured to the pipe using cable ties (not included).
Installation of External Safety Air Bleed Kit
Fig. 32
1
2 3
4
FROM
PUMP
FILTER
HEATER
CHLORINATOR
BIOSTAT/
BIOCIDE
RETURN
LINE
NOTE:
Ozone production from direct UV light will decline over time. UV bulbs continue
to illuminate after they stop producing an effective level of ozone to clean your
pool water. To make sure your pool continues to receive all the benefits of ozone,
Paramount recommends that you replace your bulb every three (3) years.
WARNING:
• Turn off power at main source before making any electrical connections
or servicing the unit.
• UV light produced by this unit is harmful to the eyes and may cause
blindness! Do not look directly at a lit bulb!
BULB REPLACEMENT