28
Guidance and manufacturer’s declaration ― electromagnetic emission
The bed is intended for use in an electromagnetic environment specified below. The customer or the user of the bed must
use this bed in an environment specified below.
Emissions test
Compliance
Electromagnetic environment — guidance
RF emissions
CISPR 11
Group 1
The bed uses RF energy only for its internal functions.
Therefore, its RF emission level is low and causes almost no
interference with nearby electronic equipment.
RF emissions
CISPR 11
Class A
Use the bed in a power supply network of a professional
environment, such as a hospital or other medical facility.
Harmonic emissions
IEC 61000-3-2
N/A
Voltage fluctuations / flicker emissions
IEC 61000-3-3
N/A
Guidance and manufacturer’s declaration — electromagnetic immunity
The bed is intended for use in a dedicated health care facility environment. The customer or user of the bed must use this
bed in an environment specified here.
Immunity test
IEC 60601-1-2
Test level
Compliance level
Electrostatic discharge
(ESD)
IEC 61000-4-2
±8 kV contact discharge
±2 kV, ±4 kV, ±8 kV, ±15 kV air discharge
±8 kV contact discharge
±2 kV, ±4 kV, ±8 kV, ±15 kV air discharge
Electrical fast transient /
burst
IEC 61000-4-4
±2 kV power supply lines
±2 kV power supply lines
Surge
IEC 61000-4-5
±0.5 kV and ±1 kV between lines
±0.5 kV, ±1 kV, and ±2 kV between lines and
grounds
±0.5 kV and ±1 kV between lines
±0.5 kV, ±1 kV, and ±2 kV between lines and
grounds
Voltage dip
IEC 61000-4-11
0% U
T
for 0.5 cycle
0°, 45°, 90°, 135°, 180°, 225°, 270°, 315°
0% U
T
for 0.5 cycle
0°, 45°, 90°, 135°, 180°, 225°, 270°, 315°
0% U
T
for 1 cycle
and
70% U
T
for 25/30 cycles
Single-phase: 0°
0% U
T
for 1 cycle
and
70% U
T
for 25/30 cycles
Single-phase: 0°
Short time power failure
IEC 61000-4-11
0% U
T
for 250/300 cycle
0% U
T
for 250/300 cycle
Rated power frequency
magnetic field
IEC 61000-4-8
30 A/m
30 A/m
Note: U
T
is the AC power supply voltage prior to application of the test level.
