12
Small flow air cell (SF) setting
Automatically change the posture by expanding
and contracting the four independent small flow
air cells (SF cells) one at a time for 15 minutes
each in the sequence of A to D. If the user’s sleep
position is extremely close to a mattress edge,
the position sensor detects the SF cell that could
cause shifting or falling, and the corresponding SF
cell is disabled so that it is automatically skipped
in the expansion and contraction sequence. If
user has a contracture, pain, etc., you can skip
arbitrary SF cells in the expansion and contrac-
tion sequence by enabling and disabling SF cells
manually. (Initial setting: Small flow)
Alternating pressure setting
Repeatedly expand and contract sets of three air cells alternately and release the pressure on the body sequentially.
(Initial setting: Enabled)
Operation sound setting
Enable or disable the operation sound of the operation panel. (Initial setting: Enabled)
Dehumidify setting
Eliminate any moisture and heat that have penetrated into the air mattress by periodically supplying air to the inside.
(Initial setting: Enabled)
[Switching between small flow and manual SF cell expansion]
1
Press the Setting button to switch to setting display.
2
Press the [Small flow] button to switch between small flow
and manual SF cell expansion.
3
When small flow:
Press the [A] to [D] buttons as necessary to enable and dis-
able the SF cells.
• When SF cells are enabled: Corresponding [A] to [D]
buttons are bright.
• When SF cells are disabled: Corresponding [A] to [D]
buttons are dim.
Note
!
z
Small flow sequence expansion and contrac-
tion are performed only for the enabled SF cells.
z
When back support is disabled, all SF cells are
disabled if the back angle becomes 45° or more.
SF sensor off mode:
If you insert the power plug into an outlet while pressing the
Setting button, the SF cells will be enabled regardless of the
sleep position. (The [Small flow] button flashes. Please note
that the automatic max. inflate mode will not function in this
state.)
When manual SF expansion:
Select an [A] to [D] button and press the adjustment buttons
to adjust the softness of the SF cell. There are the 4 softness
levels of 0 to 3.
Note
!
z
Expansion is not performed for any SF cell with
the softness set to 0 during manual SF cell ex-
pansion. Furthermore, expansion and contrac-
tion are not performed and the expanded state
is maintained for any SF cell with the softness
set to 1 to 3.
z
Adjust the SF cells to the appropriate softness
while checking the condition of the user.
4
Press the Setting button to complete the setting.
Adjustment buttons
When manual SF cell expansion:
Adjust the softness.
Small flow button
When small flow:
Bright
When manual SF expansion: Dim
A to D buttons
When small flow: Enables or disables.
When manual SF cell expansion:
Selects the SF cell for which to
adjust the softness.
Dehumidify button
When enabled: Bright
When disabled: Dim
Operation sound button
When enabled: Bright
When disabled: Dim
Status display screen (digital number)
When you select any of the [A] to [D] buttons during
manual cell expansion, the softness is displayed.
Status display screen (
icon)
When enabled: Displayed
When disabled: Not displayed
Alternating pressure button
When enabled: Bright
When disabled: Dim
1
Press the Setting button to switch to setting display.
2
Press the [Alternating pressure], [Operation sound], or [De-
humidify] button to enable or disable the setting.
3
Press the Setting button to complete the setting.
