PARAMOUNT BED cococia Fuka, Инструкция по эксплуатации

Страница: 19 / 36

18
[How to clean the top cover]
Open the fasteners and remove the top cover from the bottom cover.
Use soapy water (commercially available soap, such as neutral detergent diluted with water) to soak the
cover to wash.
Rinse with water until there is no residual detergent.
Do not twist, but wring out gently without causing damage.
Dry completely in a shaded area.
Attach the top cover to the bottom cover and close the fasteners all the way.
[How to clean the air cells]
J
The air cells are covered with the cover and therefore do not need to be maintained frequently.
z When maintaining the air cells, do not separate each air cell from the air mattress.
Remove the coupling from the pump and discharge air from the air cells.
Remove the top cover.
Clean the air cells by referring to "How to clean the cover" on p. 17.
Naturally dry the air cells and then close the fasteners for the cover all the way.
Connect the air mattress and pump (see p. 12).
CAUTION
z
After maintenance, check that the snap buttons for the air cells and
bottom cover are firmly snapped and the connector for the blowing tube is
connected properly. Air may not be supplied.
Air cell
Bottom cover
Connector
Blowing tube
Snap button
No
te!