PARAMOUNT BED cococia Fuka, Инструкция по эксплуатации

Страница: 13 / 36

12
CAUTION
z Install the bed on which the air mattress is placed at the required distance
from the wall at the foot end. The required distance is the value calculated
by adding 11 cm to the distance specified in the instruction manual for the
bed. When the pump is used by hooking it to the footboard, the main frame
of the bed moves back and forth during bed height adjustment and the
pump could hit the wall, resulting in damage to or deformation of the
pump, wall, or floor.
2. Connecting the air mattress and
pump
Press the levers on both sides of the coupling
inward and remove the cap with the other hand.
z
Do not forcefully remove the cap.
Press the levers on both sides of the coupling
inward from both sides and insert into the blowing
tube insertion port of the pump.
z Insert until you hear a click. Check that
both hooks on the left and right and the
insertion line are inserted into the
inside of the blowing tube insertion
port.
WARNING
z Check that the coupling of the blowing tube is connected properly. If it is
not connected properly, air may not be supplied to the air mattress and the
body pressure may not be dispersed effectively.
CAUTION
z
When removing the coupling from the pump, press the levers on both
sides of the coupling and pull the coupling out of the pump. If the coupling
is pulled off while holding the blowing tube, the coupling and blowing tube
may be damaged.
Blowing tube
insertion port
Insertion line
Hook
Hook
Insertion line
No
te!
Blowing tube insertion port
Hook
No
te!
Coupling
Cap
Lever
Head end Foot end