Worksheets
A-3
7914-A2-GB20-00
February 1998
DSX-1-to-V.35/V.11 Configuration
To connect a DSX-1-compatible unit on the CO side and a V.35/V.11-compatible
unit on the CP side, configure the units as follows. Terminal Mode factory defaults
are in bold (for Switchpack mode defaults, see Appendix C,
Switchpack
Definitions
).
Configuration
Option
V.35/V.11-Compatible Unit
(Customer Premises)
DSX-1-Compatible Unit
(Central Site)
Card Type
CP
CO
Payload Rate
U (Unframed 1544 kbps)
1 – 24 (64 – 1536 kbps)
See Table C-1 in Appendix C.
Framing
N/A
Use D4, Extended Superframe, or
Unframed.
T1 Line Encode
N/A
B8ZS or AMI
Line Build-Out
N/A
Enter 4 at the Config command
prompt. Select from the following
options:
1) 0 to 133 ft
2) 133 to 266 ft
3) 266 to 399 ft
4) 399 to 533 ft
5) 533 to 655 ft
V.35/V.11-to-V.35/V.11 Configuration
Router
V.35 Unit
V.35
LAN
Customer Premises
Router
V.35 Unit
V.35
LAN
Central Site
Cross-campus
2-wire facility
97-15534
To connect two V.35/V.11-compatible units, configure the units as follows.
Terminal Mode factory defaults are in bold (for Switchpack mode defaults, see
Appendix C,
Switchpack Definitions)
.
Configuration
Option
V.35/V.11-Compatible Unit
(Customer Premises)
V.35/V.11-Compatible Unit
(Central Site)
Card Type
CP
CO
Payload Rate
U (Unframed 1544 kbps)
1 – 24 (64 – 1536 kbps)
Must be same as CP side
Timing
Loop (not configurable)
Internal or External
