1-1
7914-A2-GB20-00
February 1998
About Hotwire Model 7914
Termination Units
1
Hotwire 7914-A1 Models and Features
Products in the Hotwire 7914 family provide “last mile/last kilometer” transport of
T1-compatible circuits between customer facilities and central site equipment
over 2-wire copper lines. The units can be used over distances substantially
exceeding traditional T1 spans and Canadian Standards Association (CSA) loop
standards.
The Hotwire 7914 supports:
V.35/V.11 or DSX-1 interface
Fractional T1 using one twisted-copper pair
Tolerance of bridged taps
Local and remote alarm surveillance
Local and remote T1 and SDSL performance monitoring
The Hotwire 7914 may be ordered either as a standalone unit (7914-A1-xxx) or
as a nest-mounted card (7914-B1-xxx) that fits in a Hotwire 7900 nest. This guide
describes the installation and maintenance procedures for the standalone
version, Model 7914-A1-xxx.
To order additional product documentation, refer to
Product-Related Documents
on page vi.
