5-1
7914-A2-GB20-00
February 1998
Customizing V.35/V.11-Compatible
Units
5
Accessing Configuration Options
This chapter provides instructions on how to change configuration options for
Hotwire Model 7914 standalone units that are V.35/V.11-compatible.
Chapter 4
provides similar information for DSX-1-compatible units.
Configuration option settings determine how the unit operates. You can change a
unit’s configuration options by:
Selecting the Board Configuration branch of the Main Menu while in Terminal
Mode.
Changing switchpack and jumper settings on the board hardware while in
Switchpack Mode.
The Main Menu for a V.35/V.11-compatible unit on the customer premises (CP)
side appears as follows:
Command
→
G123
ATTX – CP – V.35/V.11
V.35/V.11 SDSL STUR Main Menu
1) Board Status
2) Performance Monitor
3) Board Configuration
4)
Local Loopback
5)
Remote Loopback
6)
STUC Menu
R) Board Reset
?) Redisplays this Menu
Command
→
The G123 code denotes
a successful startup
CP units are SDSL Termination
Units – Remote (STUR)
CO units are SDSL Termination
Units – Central Office (STUC)
This guide depicts the system terminal menus as they appear from a CP unit.
This is the default configuration for Model 7914 standalone units.
