10
May
2005
AIM2-A2-GZ40-20
Attaching RJ21 Connectors to the 4-Slot BLC
Procedure
1. Detach the hook and loop fastener strap from the female RJ21 connector port:
lift the hook and loop fastener tab from the bottom and pull the strap open,
towards the top of the chassis, leaving it looped under the top side of the
connector frame.
2. Slide the male RJ21 connector of your ADSL cable underneath the hook and
loop fastener, from the left, and press it firmly into the female RJ21 connector
port on the chassis.
3. Pull the hook and loop fastener strap upward, making sure that it is snug
against the connector, then pull the strap back down, such that the layers stick
to one another across the top of the connector. Tuck the tab at the end of the
strap down between the connector frames so that it is out of the way of other
connections.
