14
May
2005
AIM2-A2-GZ40-20
ADSL Parameters
No configuration is necessary for the AIM24000 to operate at the default settings.
AIM24000 Management
All parameters on the AIM24000 are software selectable. Dependent upon the
management module installed in your BLC, the AIM24000 can be configured via
the Command Line Interface (CLI), Simple Network Management Protocol
(SNMP), or the web-based Network Management System (NMS). The NMS is
recommended, since it is the most capable and easiest to use.
Management Via The NMS
The NMS is an embedded web server that resides within the firmware of BLC
management modules. This web server maintains statistical and configurational
data for the AIM24000.
NOTE: If your BLC is newly installed and has not yet been initialized, you must
configure the IP Address, Subnet Mask and Gateway before you will be able to
access data or complete any other configurations. Refer to the
NMS Management
User’s Guide
at www.paradyne.com for instructions.
Table 3. AIM24000 Defaults
Parameter
Default
Backbone-VLAN
0
Downstream Speed
n/a (Adaptive Port Mode)
Flood
Uplink
Frame Type
1483LLC
IP Range 1
0.0.0.0 – 255.255.255.255
IP Range 2-4
0.0.0.0 – 0.0.0.0
Port Mode
Adaptive
Protocol
All
Standard Mode
Multimode
Upstream Speed
n/a (Adaptive Port Mode)
Virtual Channel Identifier (VCI)
35
Virtual Path Identifier (VPI)
0
VLAN
0 – 0
VLAN Priority
0
VPI/VCI Detect
On
