Paradyne 9820 Скачать руководство пользователя страница 185

Страница: 185 / 281

Setting Up NetScout Manager Plus for FrameSaver Devices

10-7

9820-A2-GB20-20

June 2000

3. To add a FrameSaver SLV-supported domain or correct property settings,

select the Edit... button (to the right of the Domain section of the Property
Editor window). The Edit Domain window opens.

4. Click on the domain from the Domains list and configure the following:

Property

Description

Setting

Groups

Stats (S)

Statistics collection

Enabled for all domains.

Hosts (H)

Level 3 information
(network)

Enabled for IP domain only.
Disabled for all other
domains.

Conversations (C)

Protocols being used

Disabled for all domains.

Logging

Event logging

Disabled for all domains and
groups.

5. Select the OK button (at the bottom of the screen) to apply the changes.

Refer to

Configuring Domains in Properties Files in the NetScout Manager/Plus &

NetScout Server Administrator Guide for additional information.

Содержание 9820


























































































































































































































































































Результаты поиска

Содержание 9820

Отзывы:

Paradyne 9820, Руководство пользователя, Страница: 185 / 281

Результаты поиска

Содержание 9820

Отзывы: