Paradyne 9820 Скачать руководство пользователя страница 169

Страница: 169 / 281

Troubleshooting

8-15

9820-A2-GB20-20

June 2000

Starting and Stopping a Test

Use this procedure to start, monitor, or abort specific tests. To abort all active
tests on all interfaces, see

Aborting All Tests

When the status of a test is . . .

The only command available is . . .

Inactive

Start

Active

Stop

Start or stop an individual test using the same procedure.

Procedure

To start and stop a test:

1. Follow this menu selection sequence:

Main Menu

→

Test

2. Select an interface to be tested (Network or Data Port PVC Tests, or Data

Port Physical Tests) and press Enter.

The selected test screen appears.

Start

appears in the Command column.

Inactive

appears in the Status column.

3. Select the DLCI number and press Enter if a PVC test has been selected.

The cursor is positioned at Start in the Command column of the first available
test. Start is highlighted.

4. Highlight the Start command for the test you want to start and press Enter.

Stop now appears and is highlighted, and the status of the test changes to
Active.

5. Press Enter to stop the test.

Start reappears and the status of the test changes back to Inactive.

6. View the length of time that the test has been running in the Result column.

Содержание 9820


























































































































































































































































































Результаты поиска

Содержание 9820

Отзывы:

Paradyne 9820, Руководство пользователя, Страница: 169 / 281

Результаты поиска

Содержание 9820

Отзывы: