manualshive.com logo in svg

Paradyne 9820, Руководство пользователя, Страница: 112 / 281

Поделиться
Скачать
Paradyne 9820 Скачать руководство пользователя страница 112

Monitoring

 6-2

9820-A2-GB20-20

June 2000

Displaying System Information

Use the Identity screen to view identification information about the FrameSaver
unit. This information is useful if you are purchasing additional or replacement
units and/or making firmware upgrades.

Main Menu

→

Status

→

Identity

View this field  . . .

To find the . . .

System Name

Domain name for this SNMP-managed node (up to
255 ASCII characters).

System Contact

Contact person for this SNMP-managed node.

System Location

Physical location for this SNMP-managed node.

NAM

NAM Type

Type of unit installed, referred to as a network access
module, or NAM (i.e., DP FR NAM). This card type is
supported by the SNMP SysDescr Object.

Serial Number

Unit’s 7-character serial number.

Ethernet MAC Address
(9820-45M)

Media Access Control (MAC) address assigned to the
Ethernet port during manufacturing.

Current Software Revision

Software version currently being used by the unit.
Format

 nn.nn.nn consists of a 6-digit number that

represents the major and minor revision levels.

Alternate Software Revision

Software version that has been downloaded into the unit,
but has not yet been implemented. Format is the same as
for the Current Software Revision.

H

In Progress

 indicates that the flash memory is

currently being downloaded.

H

Invalid

 indicates that no download has occurred or

the download was not successful

Hardware Revision

Unit’s hardware version. Format 

nnnn-nnx consists of a

4-digit number, followed by two digits and one alphabetic
character.

Содержание 9820


























































































































































































































































































Отзывы:

Нет отзывов