manualshive.com logo in svg

Paradyne 9820, Руководство пользователя, Страница: 153 / 281

Поделиться
Скачать
Paradyne 9820 Скачать руководство пользователя страница 153

FTP Operation

 7-5

9820-A2-GB20-20

June 2000

Determining Whether a Download Is Completed

To see whether a download has completed, check the Identity screen.

Main Menu

→

Status

→

Identity

Check Alternate Software Rev.  under the NAM Identity column.

H

If a software revision number appears, the file transfer is complete.

H

If 

In Progress

 appears, the file is still being transferred.

H

If 

Invalid

 appears, no download has occurred or the download was not

successful.

Changing Software

Once a software upgrade is downloaded, it needs to be activated. When
activated, the unit resets, then executes the downloaded software. With this
feature, you control when the upgrade software is implemented.

"

Procedure

To switch to the new software:

1. Go to the Control menu, and select Select Software Release.

Main Menu

→

Control

→

Select Software Release

The currently loaded software version and the new release that was just
transferred are shown.

If the download failed, 

Invalid 

appears in the Alternate Release field

instead of the new release number. Repeat the procedure in 

Upgrading

System Software

 if this occurs.

2. Select Switch&Reset.

3. Enter Yes to the 

Are you sure? 

prompt. The unit resets and begins

installing the newly transferred software.

4. Verify that the new software release was successfully installed as the Current

Software Revision.

Main Menu

→

Status

→

Identity

NOTE:

If someone opens a Telnet session and accesses the unit’s Identity
screen while the unit is downloading software, the 

In Progress...

message appears in the Alternate Software Revision field.

See 

Displaying System Information

 in Chapter 6, 

Monitoring, to see what is

included on the unit’s Identity screen.

Содержание 9820


























































































































































































































































































Отзывы:

Нет отзывов