Paradyne 8820, Руководство по установке

Страница: 64 / 86

5. Cabling: Test Access SIM
5-4
November 2004 8820-A2-GN20-80
Connecting an SCP Card to a Terminal or PC
Procedure
To connect an SCP card to a terminal or PC:
1. Connect the serial cable with 8-pin modular plugs on each end (provided with
the SCP card) into the SCP Serial port of the SIM.
2. Dress the cable to the right and through the cable retainer.
3. Plug the other end of the cable into the terminal or PC serial port, using the
DB9 adapter that is supplied with the SCP card.
4. Configure your terminal or terminal emulator with the following settings:
— Baud Rate = 9600
— Data Bits = 8
— Parity = No Parity
— Stop Bits = 1
— Flow Control = None
Connecting to a Modem for Remote Management (with SCP Card)
Before connecting the 8820 BAC to a standard AT dial-up modem, configure the
modem with the following settings:
„
Set the modem for auto answer. For example, ATS0=1.
„
Turn off character echo. For example, ATE0.
„
Enable result codes in originate mode only. For example, ATQ2.
„
Set the modem to ignore Data Terminal Ready (DTR). For example, AT&D0.
Procedure
To connect the 8820 BAC to a dial-up modem:
1. Plug a serial cable into the SCP Serial port of the chassis.
2. Dress the cable to the right and through the cable retainer.
SCP
SERIAL
04-17563
CLOCK
A
MCP
SERIAL
ALARM
IN
MCP
LAN
HUB-1
LAN
TAP
IN
SCP
SERIAL
ALARM
OUT
CLOCK
B
HUB-2
LAN
TAP
OUT
SCP
LAN