1. CLI Overview
1-2
October 2004
CLI-A2-GB20-00
Default Settings
No configuration is necessary for a DSLAM or Network Extender to operate at
default settings.
CLI User Access Defaults
Read Only:
Read/Write:
System Defaults
IP Address
Other System Parameters
Port Defaults
Username:
"general"
Password:
"Password"
Username:
"superuser"
Password:
"Password"
IPD12000 Slot 13*:
192.168.254.252
*As a method of preventing duplicate IP
Address conflicts, default IP Addresses for
the IPD12000 are configured according to
the slot location of the Multiplexer Uplink
Modules (MUMs).
IPD12000 Slot 14*:
192.168.254.253
IPD4000 Slot 5:
192.168.254.252
Micro DSLAM:
192.168.254.252
Gateway:
0.0.0.0
Inband Management:
disabled
Inband Management VLAN ID:
0 (off)
Management IP Address Range:
0.0.0.0 - 255.255.255.255 (all)
Subnet Mask:
255.255.255.0
System Name:
[MUM or Micro DSLAM Model Name]
Telnet:
enabled
TFTP:
enabled
Web Server (NMS):
enabled
Circuit Identification*:
n/a (no default)
*These parameters cannot be
configured via CLI; they are
configurable only with Simple
Network Management Protocol
(SNMP) and Paradyne’s Network
Management System (NMS).
Backbone-VLAN:
0 (off)
Flood:
Uplink
IP Range 1*:
0.0.0.0 - 255.255.255.255
IP Range 2*:
0.0.0.0 - 0.0.0.0
Protocol*:
all traffic
VLAN Priority:
0 (none)
VLAN Range:
0-0 (off)
Содержание 12000E
Страница 6: ...Contents iv October 2004 CLI A2 GB20 00...
Страница 8: ...About This Guide vi October 2004 CLI A2 GB20 00...
Страница 14: ...1 CLI Overview 1 6 October 2004 CLI A2 GB20 00...
Страница 40: ...3 CLI Commands 3 24 October 2004 CLI A2 GB20 00...
