Paradyne 12000E, Руководство по интерфейсу командной строки

Страница: 34 / 42

3. CLI Commands
3-18
October 2004 CLI-A2-GB20-00
A response to the above request would appear as follows:
Show All
The SHOW ALL command lists current system configurations; it does not list port
configurations. The response varies slightly for an IPD12000 with two MUMs.
Micro DSLAM, IPD4000 with a MUM2000-2 or IPD12000 with a MUM2000-2
The response to a SHOW ALL command for a Micro DSLAM, a MUM2000-2 in an
IPD4000 (Slot 5) or one MUM2000-2 in an IPD12000 (either Slot 13 or Slot 14) will
appear as follows:
IPD12000 with two MUM2000-2s
The response to a SHOW ALL command for an IPD12000 with two MUM2000-2s
will list select system configuration data for both MUMs. Allow Management from,
Web Server, TFTP Server and Telnet data, however, will only be listed for the
ACTIVE MUM (the MUM that you are logged into).
Slot 5 Port 1 Speed = ____ kbps The number of ports
listed, and the speed
shown for each port,
depends upon the
interface module model
type in slot 5 and the
current speed
configuration as set for
each port.
Slot 5 Port 2 Speed = ____ kbps
Slot 5 Port 3 Speed = ____ kbps
Slot 5 Port 4 Speed = ____ kbps
Slot 5 Port 5 Speed = ____ kbps
Slot 5 Port 6 Speed = ____ kbps
Slot 5 Port 7 Speed = ____ kbps
Slot 5 Port 8 Speed = ____ kbps
Slot 5 Port 9 Speed = ____ kbps
Slot 5 Port 10 Speed = ____ kbps
Slot 5 Port 11 Speed = ____ kbps
Slot 5 Port 12 Speed = ____ kbps
[system name] ->show
OR
[system name] ->show all
Slot [1, 5, 13 or 14] MUM Version: [x.xx.xx]
Mac Address: [xx-xx-xx-xx-xx-xx]
IP Address / Subnet Mask: [xxx.xxx.xxx.xxx] / [xxx.xxx.xxx.xxx]
Default Gateway: [xxx.xxx.xxx.xxx]
Inband Management [ON or OFF]
Inband Mgmt VlanID: [1-4085]
Allow Management from: [xxx.xxx.xxx.xxx to xxx.xxx.xxx.xxx]
Web Server: [Enabled or Disabled]
TFTP Server: [Enabled or Disabled]
Telnet: [Enabled or Disabled]
Cli Session Timeout: [xxx]