Paradyne 12000E, Руководство по интерфейсу командной строки

Страница: 15 / 42

CLI-A2-GB20-00 October 2004
2-1
2
COM Port Connection
Connecting a PC
Initial configuration using the CLI requires a direct physical connection from your
PC to the COM port of the DSLAM, management card, or Network Extender you
are configuring. (However, the web interface is recommended for subsequent
configuration.)
Procedure
1. Plug the provided DB9 to RJ45 adapter into the RS232 serial port on your PC.
The adapter pinout is as follows:
Pin RJ45 Port Direction PC RS232 Serial Port
1 Transmit Data TxD
→
RxD Receive Data
2 Data Set Ready DSR
←
RTS Request to Send
3 Clear to Send CTS
←
DTR Data Terminal Ready
4 Receive Data RxD
←
TxD Transmit Data
5 Ground GND
↔
GND Ground
6 Data Terminal Ready DTR
→
CTS Clear to Send
7 Request to Send RTS
→
DSR Data Set Ready
8 No Connect NC DCD Data Carrier Detect