background image

Key [8]

Timer loss

If the system timer is not functioning, usually after total
battery and AC power failure, key [8] illuminates. The
timer should be reprogrammed after total power loss.

To reprogram the timer (control panel software ver-
sions prior to 2.00): Press [

ENTER

+ master code/user

1 code + [

MEM

]. Then enter 2 digits (00 to 23) for

hours, followed by 2 digits (00 to 59) for minutes.
Press [

ENTER

twice. If trouble key [8] is still illuminat-

ed, press [

TRBL

[

CLEAR

after programming the time. 

To reprogram the timer (control panel software ver-
sions 2.00 and beyond): Press [

ENTER

+ master

code/user 1 code + [

MEM

]. Key [

MEM

flashes. Then

enter 2 digits (00 to 23) for hours, followed by 2 dig-
its (00 to 59) for minutes. Press [

ENTER

].

Key [9]

Tamper/zone wiring failure

Key  [9], if illuminated, means that there is a wiring
problem in one of your protected zones.

Key [10]

Telephone line monitor

Key [10] illuminates if the panel detects the loss of
the telephone line.

Key [11]

Fire/trouble

If the fire zone is cut, the fire zone key and trouble
key [11] will illuminate.

Most of these "trouble" conditions will be programmed
by your installer to be reported directly to your securi-

ty company. Please make sure to contact your alarm
company, however, to ensure that repairs are imme-
diately made to your security system.

Fire Alarm Operation
Alarm
Upon a Fire Alarm, the bell/siren will operate in
"pulse mode".

Silence/Reset
To silence or reset a fire alarm, enter a valid user code.

Note: IF A FIRE CONDITION EXISTS, FOLLOW

YOUR EVACUATION PLAN IMMEDIATELY!
If there is no fire condition, contact your moni-
toring company without delay to avoid an
unnecessary response.

Fire Safety in the Home
Reasonable fire safety can be achieved by following
a three point program:

1. Minimizing fire hazards
2. Providing a fire warning system
3. Having and practicing an escape plan

Minimizing Fire Hazards
The three traditional fire killers are:

1. Smoking in bed
2. Leaving children home alone
3. Cleaning with flammable liquids such as gasoline

22

23

UM616-626

UM616-626

Содержание Paradox Esprit 616LED





















Отзывы: