for the "
READY
" light before “Stay“ arming, however all
zones that have been programmed by your installer
to arm in "Stay" mode, must be "closed" (no move-
ment in the zones when arming the system).
Pressing key [
STAY
/11] steadily for 2 seconds will
automatically "Stay" arm the system.
Double “Stay” arming:
During the exit delay, pressing [
STAY
/11] again will
switch any “delay 1” or “delay 2” zones to “instant”
zones. 24 hour “Stay” zones, follow “Stay” zones,
and instant “Stay” zones are not affected. Full system
arming cancels “double stay” arming.
Fast exit:
Exit while the system is armed in “Stay” mode (key
[
STAY
/11] is flashing
*
):
A: fast exit and stay key [11]:
To exit the premises and remain “Stay” armed, press
key [
STAY
/11] for two seconds. The system will switch
to “exit delay” mode (“
READY
” LED flashes). At the
end of the “exit delay” period, the system will return
to “Stay” arming mode.
B: fast exit and regular arm key [10] arm:
Press key [10] for two seconds. The system will switch
to “regular” arming (keys [11] and [12] flash
*
) with an
“exit delay” (“
READY
” LED flashes). At the end of the
“exit delay” period, the system is “regular” armed.
*
On control panel models 728, 728 EXPRESS and 738
EXPRESS using software version 2.1X, keys indicated
will not flash, but will be constantly illuminated.
Software versions 2.2X onward, keys indicated do not
illuminate. However, if system is “Stay” armed, [
STAY
]
key will illuminate.
Key switch/Push-button Arming
Your system can include a key switch or push button
that arms/disarms the system. This arming method is
particularly useful when installed in a master bed-
room, making system arming and disarming conve-
nient and accessible. The beautifully styled Esprit
PS1 bedside remote has been specifically designed
for this application and includes a panic zone.
If an alarm is generated in your system, or a zone
that has not been defined as a “Stay” zone is opened
after panel arming, the system can only be disarmed
from a keypad (if keyswitch is defined as "Stay" arm-
ing), using an access code.
Please ask your installer for more information.
(4) MANUAL BYPASS arming
[
BYP
] +
CODE
(Arms the system while bypassing defective zones
and/or zones you wish to leave open)
Note: When you bypass a zone, it is no longer mon-
itored by the security system. It will not generate an
alarm on the control panel.
You might not wish to arm the entire system when,
for example, workers are renovating part of your
10
11
UM616-626
UM616-626
