background image

EVOHD User Manual

9

Partitioned System

4

Partitioned System

4  

Your installer can set your keypad to recognize separate protected areas. A separated system is called a 
partitioned system, which can be useful in situations where shared security systems are more practical. For 
example, a company that has both an office and a warehouse area, can arm and disarm each area separately 
while controlling access to each area. Therefore, one person may have access to only one area, whereas another 
person may have access to all areas. Access to the areas is determined by the User Access Code.

4.1 Area Display

The Area Status Display enables you to see the status of the individual areas within a partitioned system. Your 
installer can partition the system into separate areas. 
To view the status of the areas:
1. Enter your 

[

ACCESS

 

CODE

]

, and then press the 

[1] 

button.

2. Press the button corresponding to the area (i.e. 1, 2,...8), or use the 

[

and 

[

]

 buttons and press 

[

ENTER

]

 

when the area you want to view appears on the screen.

3. Press 

[

CLEAR

]

 

to exit. 

In Area Status Display mode, the following information will scroll on the LCD screen:
• ready: if all zones in the selected area are closed.
• not ready: if zones in the selected area are open.
• Front Door Open: if there is an open zone within that area.
• Trouble(s): (

section 9

) if a trouble has occurred.

• Alarms  in  Memory:  (

section 6.3

) if an alarm has occurred.

• Armed; Force Armed; Instant Armed; Stay Armed: displays the arming status of the selected area.

In Area Status Display, the following will illuminate for the area selected:
• The area lights (A1, A2, A3, and A4) if the associated area is armed. For example, if you have selected area 3 

and it is currently armed, A3 will illuminate. 

• The numerical light(s) representing any open zone(s) in a corresponding area or areas. 
• The Mem action light if any alarms have occurred.
• The Trbl action light if any troubles are occurring.
• The Stay action light if the area is Stay or Instant Armed.
• The Force action light if the area is Force Armed.
• The Byp action light if zones are bypassed.

Содержание EVOHD

















































Отзывы: