Paradox Digiplex DGP-641, Руководство пользователя

Страница: 32 / 62

Digiplex LCD Keypad’s 33
7.0 TROUBLE DISPLAY
If your system is tampered with or experiences problems, the
Trouble Display will appear on the LCD screen. Most of the trouble
conditions can be programmed by your installer to be reported
directly to your Security Company. A keypad will only display
troubles that occur in the area(s) to which it has been assigned.
Potential troubles have been sorted into eight groups. The
messages that the LCD screen will display after experiencing the
trouble are listed below with a brief explanation of the cause.
We strongly suggest that you inform your Security
Company of the trouble and allow them to service your
system.
If your keypad is in
Confidential Mode (see section 3.3.2)
,
“Troubles
[TRBL] to View” will not appear on the LCD screen until you enter
your
User Access Code
or press a button, depending on how your
keypad was programmed.
How do I view the Trouble Display?
1) When in Normal Mode (see section 3.3.1) and “Trouble(s)
[TRBL] to View” appears on the LCD screen.
2) Press the button.
The Group heading will appear with the particular trouble
causing the problem. The Troubles by Group are listed below.
3) Use the and buttons to view the specific trouble.