Digiplex LCD Keypad’s 13
4.0 ARMING
When the system is armed, the alarm system will respond to any
breach in the zones according to the zone’s programming. For
example, if someone opens a window that is armed, the alarm
system will trigger the alarm and can alert your Security Company.
4.1 E
XIT
D
ELAY
T
IMER
When you arm the system, it will start the Exit Delay Timer to
provide you with enough time to exit the protected area before
the system is armed. The
Status Light
will flash green while the
time elapses.
The timer can be assigned different time limits and the keypad
can be programmed to display the time remaining and/or beep
while the time elapses on the timer. Discuss these options with
your installer.
4.2 R
EGULAR
A
RMING
This method is used for the everyday arming of the system. All
zones within the protected area must be closed to arm the
system. To check the status of the zones in each area, refer to
section 3.6
Area Status Display
.
Содержание Digiplex DGP-641
