GS-SB1 Single Side Burner Operator Manual
Safety Considerations
•
7
4.
Connect the regulator valve
a.
Hold the regulator so it is aligned with the cylinder valve
b.
Thread the coupling nut onto the valve and tighten clockwise until there is resistance
c.
Tighten another half to three-quarters turn by hand to ensure the regulator is seated in the
valve –
do not use tools
d.
Do not use the regulator if the tank connection cannot be completed
5.
Open the LP cylinder valve
6.
If you smell gas or hear a hiss of gas escaping from the tank or regulator, close the cylinder valve
immediately and then:
a.
If the leak stops, remove the regulator from the tank and reattempt the connection
b.
If the leak persists, turn off the tank valve and remove the regulator
c.
If the leak cannot be stopped by closing the tank valve, leave the area and call the fire
department immediately
7.
Leak check the connections as described in the Leak Testing section below
Do not subject your LP gas cylinder to excessive heat, and always
store the cylinder in an upright position.
Never store a spare LP cylinder indoors or within the burner unit
enclosure.
When attaching components, ensure all connections are secured and
fully tightened to prevent leakage.
Turn off the gas supply – Natural Gas or LP Gas – when burner unit is
not in use.
Содержание GS-SB1
Страница 1: ...GS SB1 Single Side Burner Operator Manual...
