PARADISE GRILLS GS-SB1, Руководство оператора

Страница: 25 / 42

GS-SB1 Single Side Burner Operator Manual Single Side Burner Assembly
•
23
2. Lift the burner unit as needed to gain access to the regulator and gas connection point in the rear
3. Install the supplied NG regulator to the burner unit gas intake
4. Connect a natural gas flex connector between the NG regulator and NG source
Figure 13 Natural Gas Connection
5. Turn on the main gas supply and check all connections for leaks as described in the Leak Test
procedure below.
LP Gas
The consumer must provide a regulator to connect the burner unit to the LP gas cylinder. Ensure the
regulator is equipped with a hose long enough to reach from the burner unit’s gas intake fitting to the LP
cylinder. The regulator must use a 3/8” connector (below center) to attach to the burner unit gas inlet
(below right).
Figure 14 Example Regulator
1. Connect the LP regulator to the burner unit gas inlet (above right)
2. Inspect the head of the gas cylinder and head of the regulator valve to ensure there is no debris; use
a soft brush to remove any debris