Pantum P3000 Series Скачать руководство пользователя страница 2

Страница: 2 / 94

Legal notices

Trademark

Pantum and Pantum logo are registered trademarks of Zhuhai Seine Technology Co., Ltd.

Microsoft, Windows, Windows server and Windows Vista are either registered trademarks of

Microsoft Corporation in the United States and other countries.

The ownerships of software names related to this Maintenance Manual in accordance with

corresponding license agreement belong to their respective owned companies.

All other product and brand names herein may be the registered trademarks or service marks of

their respective owners.

Copyright

The copyright of this Maintenance Manual is owned by Zhuhai Seine Technology Co., Ltd.

It is prohibited to copy, translate, modify and transmit this Maintenance Manual by any means or in

any format without the prior written consent of Zhuhai Seine Technology Co., Ltd.

Version: V1.1

Disclaimer

Zhuhai Seine Technology Co., Ltd. reserves the right to make changes to the Maintenance

Manual.

The information contained herein is subject to change without notice.

Users are responsible for any damages arising from a failure to follow this Maintenance Manual.

Meanwhile, apart from the express warranty made in the product maintenance manual or

service commitment, Zhuhai Seine Technology Co., Ltd. does not make any express or

implied warranty or guarantee in relation to this Maintenance Manual (including typesetting or

words).

The copying, printing, scanning (or reproduction by any other means) of this product to create

certain documents or images may be prohibited by local laws. If you are uncertain about the

legality of using this product to create certain documents or images, you should consult your

legal advisor in advance.

Содержание P3000 Series































































































Результаты поиска

Содержание P3000 Series

Отзывы:

Похожие инструкции для P3000 Series

Бренды по названию

Популярные бренды

Pantum P3000 Series, Руководство по обслуживанию

Результаты поиска

Содержание P3000 Series

Отзывы:

Похожие инструкции для P3000 Series

Бренды по названию

Популярные бренды